Charge Controllers
Charge Controllers
OutBack, Phocos, Morningstar, Xantrex, ASC, Blue Sky charge controllers
!

OutBack MX
!
outbackmx60
60 amps

The MX60  raises the bar for high performance solar controllers. OutBack’s ingenuity and engineering experience has been combined to maximize the output power of your expensive solar array. Our real time active Maximum Power Point Tracking (MPPT) system ensures that your solar array is operating at its peak power point regardless of age, shading or environmental conditions. Systems with large solar arrays are now a snap thanks to the MX60’s 60 amp
DC output current rating for 12, 24 or 48 VDC systems - all with just one product model!

Real wiring flexibility of your solar array is finally here because of the MX60’s wide range DC input, up to 150 VOC. The ability to step-down a high voltage solar array to a low voltage battery can save you money by reducing the size of wire required and making the installation simpler and faster. Our smart multistage recharging process ensures your batteries are recharged efficiently and gently to prolong battery life and achieves the highest possible performance.

All of the MX60’s status information is displayed on the large built-in 3.1" (8 cm) backlit LCD screen. Monitoring your solar array’s performance is easy because of included data logging system that automatically records the last 64 days of system operation. OutBack’s network communication system allows your MX60 to communicate with the rest of your OutBack system, eliminating multiple product interaction problems and allowing remote monitoring via the OutBack MATE display up to 1000 feet / 300 meters away.

 

Download Outback MX60 specs. (.pdf)

Download OutBack FM80 specs. (,pdf)

Phocos

!
phocos cx
CM, CML, CX, PL Series

 

 

 

 

 

 

CM04:

- Battery State-of-Charge indicator
- Large terminals (up to 16mm²)
- PWM-regulation (shunt type)
- Boost & float charging method
- Integrated temperature compensation
- Solid-state overvoltage protection
- Reverse polarity protection
 

The CM charge regulator is especially for use in small solar systems where no load disconnect is required, as in yachts, caravans, etc. The charging regime provides best battery treatment at reasonable cost. It is a temperature-compensated PWM charging method.
 

    CM04          
Max. module current   4 A          
Voltage   12 V          
Dimensions (W x H x D)   57 x 71 x 27 mm          
Self power consumption   < 4 mA          

 

CML:

CML05-2, CML10-2, CML15-2, CML20
Solar Charge Controllers
 
- Battery State-of-Charge display with 3 LEDs
- Charge status display
- Acoustic load disconnect pre-warning
- Load disconnect indication
- Load short circuit and overload indication
- PWM-regulation (series type)
- Boost, Equalize and Float charging, also for VRLA
- SOC and voltage controlled LVD
- Automatic 12 / 24 Volt detection
- Integrated temperature compensation
- Large terminals (up to 16mm² wire size)
- Fully electronically protected
 

The CML series is a sophisticated solar charge regulator family for low cost applications. The electronic circuit is equipped with a microcontroller that provides high-efficiency charging technology together with a number of outstanding status display, warning and safety functions. The temperature-compensated three-stage PWM charging method (boost - equalization - float) is now adjustable to sealed and vented lead-acid batteries. The new version also allows an either SOC or voltage controlled low voltage disconnect function. The battery status is clearly indicated by three LEDs. As the first controller on the market in this price range it comes with an acoustic low voltage load disconnect pre-warning feature.

    CML05-2   CML10-2   CML15-2   CML20    
Max. module current   5 A   10 A   15 A   20 A    
Max. load current   5 A   10 A   15 A   20 A    
System voltage   12/24 V   12/24 V   12/24 V   12/24 V    
Self power consumption   < 4 mA   < 4 mA   < 4 mA   < 4 mA    
Dimensions (WxHxD)   80x100x32 mm   80x100x32 mm   80x100x32 mm   80x100x32 mm    
Type of protection   IP20   IP20   IP20   IP20

 

 

 

CX:

CX10, CX20, CX40
Solar Charge Regulator with LC Display
 
- Battery State-of-Charge display LCD
- Charge and discharge status display
- Acoustic load disconnect pre-warning
- Load status indication
- Choose between 3 load disconnect algorithms
- boost/absorption/float PWM-regulation (series type)
- Prepared for DIN rail mounting
- Automatic 12 / 24 Volt detection
- Integrated temperature compensation
- Covered terminals (up to 16mm² wire size)
- Full solid-state protection
- Programmable nightlight function
    CX10   CX20   CX40      
Charge current max.   10 A   20 A   40 A      
Load current max.   10 A   20 A   40 A      
System voltage   12/24 V   12/24 V   12/24 V      
Self power consumption   < 4 mA   < 4 mA   < 4 mA      
Dimensions (wxhxd)   89x90x39 mm   89x90x39 mm   89x90x39 mm      
Type of protection   IP20   IP20   IP20      
 

The CX series is a sophisticated solar charge regulator family with exceptional features in this price range. Beside a perfect PWM regulation with integrated temperature compensation the controllers provide extraordinary display, programming and safety functions. The battery state of charge is clearly displayed with a bar chart, as well as energy flows from and to the battery and the load status (e.g. overload, load short circuit). The deep discharge protection function can be set up to three different modes: voltage controlled, SOC controlled or adaptive (fuzzy logic). Acoustic warnings are built in, as well as a programmable nightlight function. The CX also provides a built-in excess energy management function which means that in combination with especially designed loads (e.g. Phocos Solar Refrigerators/Coolers SF32E, SF50E) it is possible to make use of excess energy which would be lost otherwise because of the overcharge protection of the battery. A better utilization of the solar system is the benefit. The compact case design is prepared for DIN rail mounting (mounting device available as an accessory).
 

 

PL:

PL20, PL40, PL60
Energy System Controllers
 
- 12, 24, 32, 36 and 48V in one controller
- Built-in 30 days datalogger
- Multifunctional 3 digit LC Display
- External current sensing (optional)
- RS232 interface (optional)
- Hybrid system control
- Widely programmable
- Built-in programmable logic

The PL series of charge controllers offer complete control over the charge cycle and various information about current and past performance. PL regulators have a built-in low battery disconnect switch. In addition, the versatile event controller can switch power on or off according to criteria set by the user. This allows the PL to do extra tasks such as switching a light on at night or keeping a water tank full by operating a pump when needed. Regulation can be done in both series and shunt modes. Other features include backup generator control and charging a second battery. Display shows battery voltage, charge current, ampere hours in and out of battery, load being drawn from the battery and charge status. Information is available for the past 30 days - so even if the user doesn’t remember what happened, the regulator will. With the optional PLI interface, the user can access the regulator from a computer or via modem. Data can be read or settings adjusted.
 

    PL 20   PL 40   PL 60      
Nominal Voltage   12, 24, 32, 36, 48 V   12, 24, 32, 36, 48 V   12, 24, 32, 36, 48 V      
Solar Charge Current max.   20 A   40 A   60 A      
Load Current max.   20 A   7 A   30 A      
Max voltage Drop   0,4 V   0,4 V   0,42 V      
Ambient Temperature   -20 to +55 °C   -20 to +55 °C   -20 to +55 °C      
Supply Current   9 mA   13 mA   20 mA      
Temperature Sensor Range   -15 to +50 °C   -15 to +50 °C   -15 to +50 °C      
Regulation Set Points   4 preset programs, 1 user adjust   4 preset programs, 1 user adjust   4 preset programs, 1 user adjust      
Dimensions (h x w x d)   100 x 109 x 41   130 x 124 x 50   225 x 175 x 62      
Weight   320 g   515 g   1100 g      

 

Morningstar
!
tristarcontroller
TriStar, ProStar, SunSaver

 

 

 

 

The TriStar is Morningstar's newest and most advanced product and is capable of handling solar arrays up to 4kW.

  • The controller is a three-function controller that provides reliable solar battery charging, load control or diversion regulation
  • Uses advanced technology and automated production to provide exciting new features at a competitive cost
  • The controller is UL listed and is designed for both solar home systems and professional applications

Morningstar's ProStar is the world's leading mid-range solar controller for both professional and consumer applications. This second generation ProStar:

  • Adds new features and protections using highly advanced technology
    - Electronic Protections: Short-circuit - solar and load; Overload - solar and load
  • Provides longer battery life and improved system performance
    - 4 stages of charging
  • Sets new standards for reliability and self-diagnostics
    - expect failure rate will be less than 1 per 1,000 units over 5 years.

Morningstar's SunSaver is the world's leading small solar controller for both professional and consumer applications.

                        

This technology provides:
      
  		• Proven Reliability
  		• PWM Battery Charging
  		• Consistent High Quality
    		   

     

     

     

     

    Morningstar's SunSaver is the world's leading small solar controller for
    both professional and consumer applications.
    Features
          
  		• Is approved for use in hazardous locations -
    Class 1, Division 2, Groups A, B, C, D.
  		• Series design (not shunt).
  		• No Need to derate.
  		• Fully encapsulated in epoxy potting.
  		• Ability to parallel for 40 amps or more.

    Download TriStar Specs. (.pdf)

    Download ProStar Specs. (.pdf)

    Download SunSaver Specs. (.pdf)

    Xantrex C-Series Charge Controllers
    !
    xantrexccontrollers
    C35, C40, C60

    A Controller for Virtually Any DC Charging Source

    The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation. All can be used as a charge, diversion, or load controller and come with a standard multi-color charge status LED.

    All three of these fully solid state, microprocessor-driven controllers are UL and cUL listed. Whatever the charging source, a C Series controller is sure to meet your DC controller needs.

    Product Features

    • Ensures your batteries are always charged
    • Silent, pulse width modulated microprocessor control (maximizing battery life)
    • Field adjustable voltage and battery set points
    • Electronic protection against short-circuit, overload, over temperature and reverse polarity conditions.

    Download Xantrex C-Series Specs. (.pdf)

    ASC SpecialtyConcept
    !
    asc12controller

     

     

    4, 8, 16a, Mark 22,  12 & 24v models

    TC: Temperature Control

    LVD: Low Voltage Disconnect

    ADJ: Adjustable Setpoints

    The ASC is a solid-state charge controller for use in power systems with currents up to 16 amps. It is available in 12 and 24 volt models.  Options include low-voltage load-disconnect, battery temperature compensation, and user adjustable set points.  ASC is a completely encapsulated and waterproof solar charge controller certified for use in hazardous gas locations.

    Features

    • Completely encapsulated and waterproof
    • Optional internal or external temperature compensation
    • Optional 10Amp Load Disconnect 
    • Available in 4, 8, 12, and 16 amp versions
    • Available in 12 volt and 24 volt)
    • Guaranteed to fully charge a completely dead battery
    • CSA Approved for hazardous locations

    The MARK/22

     

    Is a solid-state charge controller for use in 12 Volt PV systems with currents up to 22 amps. They include a full-featured LCD meter to display battery voltage, array current and charge set-point. They are intended to flush-mount within a wall for a very distinctive appearance. The Mark/22 is ideal for use in Recreational Vehicles PV Kits.

    Features

    • Fuse protection on both battery and array
    • Easy-to-use LCD display
    • Bar graph battery condition indicator
    • Controls up to 122 amps of array current
    • Available in 12 volt
    • Guaranteed to fully charge a completely dead battery

    Download ASC Controller Specs. (.pdf)

    Download ASC Mark22 Controller Specs. (.pdf)

    Blue Sky Energy
    !
    solarboost50&3048pic
    Solar Boost

    • The Ultimate Photovoltaic Charge Controller...
    Increases Charge Current Up To 30% Or More!

     Patented Maximum Power Point Tracking (MPPT) technology allows Solar Boost 50 and Solar Boost 3048 to increase charge current up to 30% or more compared to conventional charge controllers. Don’t waste money by
    throwing PV power away! Get the power you paid for with a Solar Boost charge controller.

     Solar Boost controllers also provide an advanced fully automatic three stage charge control system to ensure the battery is properly and fully charged, resulting in enhanced battery performance with less battery maintenance. An equalize function is also included to periodically condition liquid electrolyte lead-acid batteries.

     An optional user friendly digital display is available to monitor PV charge performance. Optional temperature compensation of charge voltage is also available to further improve charge control and battery performance.

     

    Download Solar Boost 50 & 3048 Specs. (.pdf)

    Download Solar Boost 2000E Specs. (.pdf)